EasyManuals Logo

Ampeg BA-108 Owner’s User Manual

Ampeg BA-108 Owner’s
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
BA-108 / BA-110 Bass Guitar Combo
8
BA-108 / BA-110 TECHNICAL SPECIFICATIONS
Output Power Rating 25 watts rms @ 8 ohms, 3% THD [BA-108]
35 watts rms @ 8 ohms, 3% THD [BA-110]
Signal to Noise Ratio 67 dB (20 Hz–20 kHz, unweighted) [BA-108]
68 dB (20 Hz–20 kHz, unweighted) [BA-110]
Maximum Gain @ 1 kHz 0 dB input: 50 dB
–15 dB input: 35 dB
CD input: 44 dB
Effects Return: 34 dB
Tone Controls Bass: +12/–12 dB @ 40 Hz
Mid: +12/–12 dB @ 600 Hz
Treble: +14/–14 dB @ 5 kHz
SpeakerSpecs 1x8"speaker:8ohms,40W[BA-108]
1x10"speaker:8ohms,100W[BA-110]
Power Requirements Japan 100 V~ 50–60 Hz
35 W [BA–108] U.S. 120 V~ 60 Hz
45 W [BA–110] EU 220–240 V~ 50–60 Hz
Size (H x W x D) 15.3 in / 389 mm x 15.3 in / 389 mm x
11 in / 279 mm (from handle to foot) [BA-108]
16.3 in / 414 mm x 16.3 in / 414 mm x
12 in / 305 mm (from handle to foot) [BA-110]
Weight 28 lb / 12.8 kg (approximately) [BA-108]
33 lb / 15.0 kg (approximately) [BA-110]
Service Information
I
f you are having a problem with your BA-series combo, you can go to our website
(www.ampeg.com)
and click on Support for service information, or call Technical Support at
1-800-898-3211
Monday-Friday during
normal business hours, PST
, to receive assistance. If
you are outside of the U.S., contact your local distributor for technical support and service.
BA-series combos are covered with a durable fabric-backed vinyl material, so be sure to clean it with
a dry lint-free cloth.
Never spray cleaning agents on the BA-series combo. Avoid abrasive
cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
©2011 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW0899 Rev. B 07/11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ampeg BA-108 Owner’s and is the answer not in the manual?

Ampeg BA-108 Owner’s Specifications

General IconGeneral
Power Output20 watts
Speaker Size8 inch
Tone ControlsBass, Treble
Inputs1 x 1/4" (instrument)
Speaker1 x 8"
ControlsVolume, Bass, Treble
Outputs1 x 1/8" headphone output

Related product manuals