Need help?Do you have a question about the Ampeg Heritage SVT-810E and is the answer not in the manual?
Details the jackplate configuration for the Heritage SVT-810E bass guitar cabinet.
Details the jackplate configuration for the Heritage SVT-810AV bass guitar cabinet.
Illustrates the wiring connection between speakON and 1/4-inch connectors.
Illustrates the combined mono connection for the bass guitar cabinets.
Illustrates the split dual connection for the bass guitar cabinets.
Details the jackplate configuration for the Heritage SVT-810E bass guitar cabinet.
Details the jackplate configuration for the Heritage SVT-810AV bass guitar cabinet.
Illustrates the wiring connection between speakON and 1/4-inch connectors.
Illustrates the combined mono connection for the bass guitar cabinets.
Illustrates the split dual connection for the bass guitar cabinets.
General| Type | Bass Cabinet |
|---|---|
| Configuration | 8x10" |
| Power Handling | 800 Watts RMS |
| Impedance | 4 Ohms |
| Woofer Size | 10" |
| Enclosure Material | Plywood |
| Woofer Composition | Eminence |
| Grille | Black |
| Sensitivity | 100dB SPL @ 1w/1m |
To Next Page