To Next PageTo Next Page
Need help?Do you have a question about the Ampeg SVT-810E and is the answer not in the manual?
Diagram showing a standard connection between an amplifier and a single speaker cabinet.
Diagram illustrating connecting two speaker cabinets in parallel to an amplifier.
Diagram demonstrating how to connect multiple speaker cabinets using daisy-chaining.
Details the function and use of 1/4-inch input/output jacks for amplifier connection.
Explains the Speakon input/output jacks for connecting amplifiers to speaker cabinets.
Describes the control for adjusting the level of the high-frequency horn.
Diagram showing a standard connection between an amplifier and a single speaker cabinet.
Diagram illustrating connecting two speaker cabinets in parallel to an amplifier.
Diagram demonstrating how to connect multiple speaker cabinets using daisy-chaining.
Details the function and use of 1/4-inch input/output jacks for amplifier connection.
Explains the Speakon input/output jacks for connecting amplifiers to speaker cabinets.
Describes the control for adjusting the level of the high-frequency horn.
General| Amplifier class | - |
|---|---|
| Frequency range | 58 - 5000 Hz |
| Audio output channels | - channels |
| Peak power per channel | 800 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| Product color | Black |
| Connectivity technology | Wired |
| Package weight | 74800 g |
Weight and Dimensions| Depth | 406.4 mm |
|---|---|
| Width | 660.4 mm |
| Height | 1219 mm |
| Weight | 63500 g |
