Need help?Do you have a question about the Ampeg Svt-410hlf and is the answer not in the manual?
General| Speaker Configuration | 4 x 10" |
|---|---|
| Impedance | 4 Ohms |
| Weight | 85 lbs |
| LF Driver | 4 x 10" Custom Eminence Speakers |
| Power Handling | 500W RMS |
| Sensitivity | 100dB |
| HF Driver | 1 x Horn |
| Cabinet Type | Bass Cabinet |
Describes the 1/4" and Speakon jacks, and the high-frequency horn level control on the cabinet.
Illustrates the correct wiring for connecting Speakon to 1/4" cables for audio signal transmission.
Illustrates connecting a single cabinet using a 1/4" speaker cable from the amplifier.
Explains connecting multiple cabinets in series using Speakon or 1/4" connections.
To Next Page