SVT-410HLF Bass Guitar Cabinet
2
What’s in the Box
SVT
®
-410HLF Bass Guitar Cabinet, Quick Start Guide.
Introduction
Your Ampeg SVT-410HLF 4x10 Bass Guitar Cabinet is a high quality, two-way speaker
cabinet, suitable for all sizes of venues. The cabinet features heavy duty recessed handles,
an industrial strength grip bar, and heavy duty rear wheels. Skid rails are placed on the
back of the enclosure to protect it while loading in and out of venues.
The Speakon
®
and 1/4" jacks are wired in parallel, allowing easy daisy chaining from
one speaker cabinet to another. Each of the jacks may be used as an input or a through
connection. Speakon connectors are recognized as the standard for professional
installations, assuring a secure, permanent connection that won’t corrode, vibrate loose or
be easily tampered with. The 1/4" jacks are convenient, however, the Speakon jacks are
recommended when using power ampliers over 150 watts for permanent installations, or
for the “rst” speaker among a number of daisy chained speakers.
In order to get the most out of your new Ampeg speaker cabinet, please fully read this
Owner’s Manual, as well as the Important Safety Instructions included with your cabinet,
before you begin playing.
And thank you for choosing Ampeg.
TABLE OF CONTENTS
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Jackplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Suggested Hookup Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty and Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To Next Page
Loading...
Need help?
General
