Ampeg MICRO-CL Owner's Manual

7
MICRO-CL Stack
Technical Specications
Output Power Rating 100 Watts @ 8 Ω
Signal to Noise Ratio 72 dB (20 Hz – 20 kHz, unweighted)
Maximum Gain 59 dB at 1 kHz
Amplier Inputs 2 x 1/4" Jacks [0dB, –15dB]
2 x 1/8" Jacks [Aux, Headphones]
Tone Controls Bass: +11/–11 dB @ 50 Hz
Midrange: +11/–11 dB @ 600 Hz
Treble: +13/–13 dB @ 6 kHz
Power Requirements Japan: 100V ~50–60 Hz, 85W
U.S.: 120V ~60 Hz, 85W
EU: 220–240V ~50–60 Hz, 85W
Amplier Size (H x W x D) 7 in/178 mm (with feet) x 12.2 in/310 mm
x 10 in/254 mm
Amplier Weight 13.8 lb / 6.3 kg
Cabinet Frequency Response 57 Hz – 5 kHz
Cabinet Sensitivity 100 dB SPL @ 1W/1m
Cabinet Input 1 x 1/4" Jack
Speaker Specs 2 x 10" LF drivers
Cabinet Size (H x W x D) 13 in/330 mm (with feet) x 24 in/610 mm
x 11 in/279 mm
Cabinet Weight 33.2 lb / 15.1 kg
The MICRO-CL is covered with a durable, fabric-backed vinyl material. Clean with a dry, lint-free cloth. Never spray
cleaning agents onto the stack. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.

Ampeg MICRO-CL Specifications

General

Inputs	1 x Instrument
Aux Input	1 x 1/8"
Type	Solid State
Preamp	Solid-State
Power Amp	Solid-State
Tone Controls	3-band EQ
Speaker Output	1 x 1/4"
RMS Power Output	100W
Power Output	100 watts