Ampeg Portaflex Series User Manual

14
PF-20T / PF-50T Bass Guitar Amplifier
PF-20T & 50T amps are covered with sheet metal, so be sure to clean it with a dry, lint-free cloth. Never spray
cleaning agents on the amplifier. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
Warranty and Support
Visit WWW.AMPEG.COM to...
(1) ...identify WARRANTY coverage provided in your local market. Please keep your
sales receipt in a safe place.
(2) ...REGISTER your product.
(3) ...CONTACT Technical Support, or call 818-575-3600.
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and Portaex are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the
U.S. and/or other jurisdictions.
www.ampeg.com
Yamaha Guitar Group Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Rev. A

Ampeg Portaflex Series Specifications

General

Series	Portaflex
Type	Bass Amplifier
Power Output	Varies by model (e.g., 350W, 500W, 800W)
Speaker Configuration	Varies by model (e.g., 1x15", 2x10", 4x10")
Tube Preamp	Yes (on some models)
Solid State Power Amp	Yes (on some models)
EQ	Varies by model. Typically 3-band EQ (Bass, Mid, Treble). Some models have additional EQ controls.
Inputs	1 x Instrument
Outputs	Varies by model
Impedance	Varies by model (e.g., 4 ohms, 8 ohms)
Weight	Varies by model (e.g., 35 lbs, 65 lbs)
Dimensions	Varies by model
Tone Controls	Bass, Mid, Treble