www.ampereelectric.co.uk
Assembly
Your e-bike comes 95% assembled. To complete the assembly please insert the upper part of the folding stem
into the lower part of the folding stem whilst the stem is folded down. You will also need to attach the pedals.
To do this, instructions with diagrams are set out below.
If you are having difficulty assembling the e-bike, please call your retailer for assistance. Further help may be
available on our website where we publish FAQs or email us at enquiries@ampereelectric.co.uk
Please note – The pictures may vary from the actual product; however, the process of assembly will remain the
same.
Installing the Upper Stem to the Lower Stem
1. Insert the upper part of the stem into the lower part of the stem shown in image 1 below. Then tighten
the quick release lever to secure.
To Next Page
Loading...
