6
V2.0 04.06.20
Montage
The bike has made a long journey before reaching you, double-check
the following things:
1. Check the wheels. Spin the wheels and see if they run freely.
2. Test the breaks. Spin the front wheel and the rear wheel separately.
Apply the brake levers separately and make sure the bakes are
working correctly.
3. Check the drivetrain. Pedal by hand and check if the chain or the
belt drive runs freely. Shift the gears on the 10-speed bike.
4. Check your bike visually. Does everything seem alright?
Remember to check your bike occasionally and view our Ampler Bikes
Maintenance information.
Final check before your rst ride
Take the 4 mm hex key and adjust the perfect seat height
1. Place the bike in a way that allows you to support yourself against a
wall when sitting on it.
2. Put one pedal in its lowest position.
3. Hop on and try to reach the pedal with your heel.
4. You have the perfect seat height when you are able to place your
heel on the pedal with an almost fully stretched leg.
5. Tighten your seat bolts!
And you are good to go!
Adjust the seat height
4 mm
To Next Page
Loading...
