Need help?Do you have a question about the Ampler Stellar and is the answer not in the manual?
Explains the importance and purpose of the manual for safe and correct usage of the Pedelec.
Outlines the content covered within the manual, providing information for familiarization and safe operation.
Introduces symbols and visual aids used throughout the manual to convey important information.
Details hazard warning symbols, their meanings, and precautions to prevent personal injury or property damage.
Explains various symbols used for single actions, numbered steps, and additional information or recommendations.
Specifies which Pedelec models (Stellar, Stout) and model years (2022) the manual applies to.
Lists additional component instructions available in PDF format from the Ampler Support Portal.
Covers safe usage, intended purpose, and prohibited uses of the Pedelec bicycle.
Defines the proper use of the Pedelec as an EPAC for urban and commuting on public roads.
Lists activities and conditions considered unsafe or improper for the Pedelec, such as off-road riding.
Provides essential safety guidelines for the proper and safe use of the battery charger.
Details potential dangers and risks associated with using the Pedelec, including loose parts and improper operation.
Explains the meaning of various symbols found on the shipping carton for safe handling and disposal.
Lists all items included in the package for the Pedelec and its accessories kit.
Provides instructions on how to safely move and lift the shipping carton containing the Pedelec.
Step-by-step guide for safely removing the Pedelec from its packaging and checking for damage.
Instructions for carrying the Pedelec after unpacking, emphasizing correct lifting points and posture.
Details the various parts and their locations on the Ampler Pedelec bicycle.
Explains where to find the unique frame identification number for service and ordering.
Describes the location and information found on the bike's type label, including manufacturer details.
Identifies the components of the handlebar assembly, including stem, grips, and brake levers.
Describes the hydraulic disc brake system, levers, hoses, and reach adjustment.
Details the saddle and seatpost, including adjustment mechanisms and clamp types.
Explains the components of the wheels, including rims, spokes, hubs, and the integrated electric motor.
Describes the front and rear lighting setup, including lights and reflectors.
Details the electric motor, battery, and assist modes, and how the drive system works.
Explains the integrated battery system, its power supply function, and charging port location.
Lists the specifications and components of the battery charger, including plugs and LED indicator.
Introduces optional accessories available for the Pedelec, such as the Bike Pass and lock.
Information about the essential data provided by the Ampler Bike Pass for service inquiries.
Details the optional bicycle lock and its appropriate holder for mounting.
Describes the optional trailer adapter and its compatibility with bike trailers.
Introduces the downloadable mobile application for enhanced control and statistics of the Pedelec.
Lists the necessary tools, including hex keys, required for assembling the Pedelec components.
Specifies torque values for critical screws and bolts like headset and pedals for secure assembly.
Guide for correctly positioning and securing the handlebar and stem for straight riding.
Instructions for correctly attaching the left and right pedals to the crank arms, noting thread types.
Describes the location and type of reflectors (white front, red rear) on the Pedelec.
General instructions for attaching optional accessories like trailer adapters and locks.
Step-by-step instructions for mounting the trailer adapter to the rear wheel axle.
Instructions for mounting the bicycle lock holder onto the Pedelec's eyelets.
A checklist for initial inspection of the assembled bike, covering components, fasteners, and wheels.
Procedures for adjusting the bike's components to suit the individual rider's needs.
Guide for setting the correct saddle height by following the minimum insertion depth markings.
Instructions for adjusting the front light beam for optimal road illumination.
Explains fundamental operations of the Pedelec, including powering on/off and display functions.
Steps for powering the bike on for the first time and for normal start-up from standby.
How to choose between standard, max, or 0% assist modes using the power button.
Procedure for operating the front and rear lights together using the power button.
Detailed steps for connecting and charging the battery using the provided charger.
Information on initial brake effectiveness, longer braking distances, and bedding-in procedures.
Advice on riding safely in different weather and road conditions, affecting steering and braking.
Tips for safe braking and cornering, considering factors like speed, luggage, and trailers.
Pre-ride checks and preparation guidelines to ensure a safe and problem-free journey.
A comprehensive checklist for performing essential pre-ride inspections of the Pedelec and accessories.
Emphasizes the importance of wearing a helmet for protection against serious injuries.
Basic steps for operating the Pedelec while riding, including switching on and selecting assist modes.
Specific instructions for bedding-in new brake pads to achieve optimal braking performance.
Steps to follow after finishing a ride, including parking and switching off the Pedelec.
General guidelines for cleaning the Pedelec, emphasizing safe methods and avoiding high pressure.
Recommended cleaning steps after each ride to remove excessive dirt and allow damp parts to dry.
How to perform routine cleaning of the bike manually with water and mild detergent.
Regular checks and maintenance tasks for components like brakes, tires, and drivetrain.
Covers checking brake function, pads, hoses for wear, and proper adjustment.
Instructions for checking fenders for damage and ensuring adequate clearance from tires.
Guide on checking and adjusting the headset for smooth steering and to eliminate play.
Maintenance advice for the chain, including checking wear, lubrication, and elongation.
Checks for wheel alignment, spokes tension, and tightening of axle nuts.
Guidance on checking tire pressure, tread, sidewalls, and procedures for changing tires.
Importance of regularly checking and tightening all fasteners to prevent loosening.
Advice on checking battery charge levels and cleaning the charging port.
Addresses issues related to slow or unresponsive pedaling assistance, often due to tire pressure.
Solutions for power-on problems, including battery discharge, display lock, and button malfunction.
Troubleshooting steps for a blank, locked, or error-displaying screen on the Pedelec.
Solutions for noise and rubbing problems related to brakes, including pad condition and adjustment.
Guidance on when the motor does not engage during pedaling, often due to assist mode or cable faults.
Steps to resolve problems with front and rear lights not illuminating, checking cables and lamps.
Solutions for errors related to the battery charger, connection to mains, or battery defects.
Troubleshooting connectivity problems between the Pedelec and the mobile app.
Procedure to reset the Pedelec's electrical system and settings via a firmware restart.
Overview of functionalities offered by the Ampler Bike App, including control and statistics.
Instructions for downloading, installing, registering, and connecting the app to the Pedelec.
Guide on how to keep the bike's software up to date for optimal performance and features.
Steps for calibrating the torque sensor, recommended every 3-6 months for accurate assistance.
Procedure for performing a factory calibration, requiring Ampler Customer Service enablement.
Details recommended inspection intervals, including first, annual, and regular checks.
Information on who performs repairs (bicycle workshop, Ampler Service) and the need to contact Customer Service.
Steps for putting the bike out of operation for extended periods, including cleaning and storage.
Guidelines for proper storage of the bike, protecting it from environmental factors and temperature extremes.
Recommendations for maintaining the battery charge between 40-80% during periods of non-use.
Lists components like seatpost, saddle, and pedals that can be disassembled for storage or shipping.
Instructions for environmentally friendly disposal of the battery, charger, and Pedelec components.
Detailed technical data for the Stellar and Stout models, including frame, weight, drivetrain, and battery.
Specifications for the battery charger, including voltage supply, output, and charging current.
Technical details for the trailer adapter, including trailer load capacity and mounting.
Technical details for the rear carrier, including load capacity and mounting points.
Contact information for the manufacturer (Ampler Bikes OÜ) and customer service.
Official address of the manufacturing company, Ampler Bikes OÜ.
Contact details, including email and telephone number, for customer support.
Information on where to find additional resources, guides, and videos for the Pedelec.
Information about the manufacturer, Ampler Bikes OÜ, and their address.
States the product as an Electrically Power Assisted Cycle (EPAC) and its trade name/model.
Lists the EU directives, such as LVD and EMC, that the product complies with.
Lists the safety and technical standards, such as EN 15194, that the product adheres to.
To Next Page
General