Ampler – Stellar / Stout 40Troubleshooting faults and errors
9.1 Restarting the rmware
A rmware restart resets the Pedelec's settings and restarts the Pedelec's electrical system support.
It can be triggered through the power button or through the Ampler Bike App.
This can help to solve the following issues:
y Minor faults or deviations in the behaviour of the Pedelec
y Issues with the power button
y Communication issues between Ampler Bike App and the Pedelec
Restart the rmware
1. Press and hold the power button until the rmware resta symbol is shown.
2. Release the button
y The Pedelec's software switches o.
3. Press the power button again to switch on the Pedelec.
y The Pedelec switches on.
4. If this method does not work:
Contact Ampler Customer Service.
To Next Page
Loading...
