Ampler Stellar - Operation: riding the Pedelec; Braking performance during the first few rides; Environmental conditions; Riding a Pedelec: braking and cornering

31 Ampler – Stellar / Stout
7 Operation: riding the Pedelec
In order to make the daily use of the Pedelec as problem-free as possible for all journeys, there are a few things to bear in mind:
1. Check the Pedelec before each ride using the "Before the ride" checklist.
2. Use personal protective equipment (e.g. a helmet).
3. Be aware of environmental conditions and special circumstances when riding a Pedelec.
Braking performance during the rst few rides
The brake pads of the hydraulic disc brakes do not perform at their full braking potential at the rst use. This means there
will be a longer braking distance and that the overall braking power will increase with use in the beginning.
 Note that full braking power is not available during the rst few rides and that it will increase until the brakes will reach
their full potential.
Environmental conditions
You are usually travelling at higher speeds with a Pedelec compared to a normal bicycle. This also means that the Pedelec reacts
dierently to unfavourable environmental conditions: wetness, rain, snow and ice, but also sand or dirt on the road as well as
dierent road surfaces can aect the steering when swerving at high speeds. Mind the longer braking distances or inuence
of the handling of the Pedelec compared to a normal bicycle that you might be used to.

While riding pay attention to the respective environmental conditions and adapt your riding style accordingly.
Riding a Pedelec: braking and cornering
When riding a Pedelec, braking distances can increase due to typically higher speeds, especially when riding with luggage
and carrying weight.
When riding with a trailer, the handling of the Pedelec may change, especially in cornering and when braking.
When cornering, the exerted forces can be higher than what you are normally used to.

When riding with a trailer, carrying luggage or load and at high speeds, adjust your riding style to suit the conditions.
7.1 Before your ride
7.1.1 Checklist "Before Every Ride"
J Carry out a visual inspection of the Pedelec and all accessories according to the checklist:
y Are all accessories securely mounted and fastened?
Parts What to do before each ride?
Brakes J Check the function of both brakes.
J To do this, lift the front and rear wheels individually, spin them and apply the brakes as a test.
Drivetrain J Move both pedals manually.
Rechargeable battery J Check the state of charge of the battery.
Lighting system J Check the lighting system’s functionality.
J Check reectors: Securely attached? Clean?
Tires J Check the tire tread.
J Check the condition of the sidewalls.
J Check tire pressure, inate if necessary.
Operation: riding the Pedelec