23
7.2.3 EMERGENCY OFF
If you would like to quickly end the training session, there several ways to do so:
1. Touch the “End” field at the bottom left of the AmpliApp screen.
2. Touch the “Pause” field at the top centre in the screen.
3. Touch the “Options” field bottom right.
4. The easiest way to end the training is to remove the distributor from the electrode suit. To
do so, you only need to hold the distributor (or the distribution cable of the distributor)
then pull it. This also immediately stops the training and is also possible when you are
not in the AmpliApp screen or if this no longer responds. Practise taking off the distributor
before starting each training and always demonstrate to your customers who train with
the AmpliCube the pulling off of the distributor as an important part before each training
unit.
To Next Page
Loading...