Amprobe IR608A - TROUBLE SHOOTING; CE CERTIFICATION

5
Note:
• DO NOT use solvents to clean the plastic lens.
Case Cleaning: Use soap and water on a damp
sponge or soft cloth.
• DO NOT submerge the unit in water.
TROUBLE SHOOTING
Code Problem Action
--- (on display) Target
temperature is
over or under
range
Select target
within
specications
Battery icon
appears
Possible low
battery
Check and/or
replace battery
Blank display Possible dead
battery
Check and/or
replace battery
Laser doesn’t
work
Low or dead
battery
Replace battery
CE CERTIFICATION

This instrument conforms to the following
standards:
EN 61326-1 -
Electromagnetic Emissions and Susceptibility
EN 61010-1 - General Safety
EN 60825-1 - Laser Safety
Between approximately 250Mhz and 800 Mhz
at 3V/m, the instrument may not meet its stated
accuracy.