Amprobe RS-3 PRO CAT IV Analog User Manual

RS-3 PRO
RS-1007 PRO
CAT IV Analog
Clamp meter
Series
Users Manual
Mode d’emploi•
Bedienungshandbuch•
Manuale d’Uso•
Manual de uso•
Användarhandbok•

Amprobe RS-3 PRO CAT IV Analog Specifications

General

Type	Analog Multimeter
Measurement Category	CAT IV 600 V
Continuity	Yes
dB Measurement	Yes
Battery Test	Yes
Safety Rating	CAT IV 600V

Summary

Limited Warranty and Limitation of Liability

Repair and Replacement Procedures

Global procedures for warranty and non-warranty repairs and replacements.

Symbols and Safety Information

Safety Warnings and Precautions

Critical warnings for safe operation with hazardous voltages and environments.

Introduction and Operation Guide

Measuring AC Voltage

Step-by-step guide to measuring AC voltage with the clamp meter.

AC Current Measurement

Instructions for performing AC current measurements using the clamp meter.

Measuring Resistance and Continuity

Guide on measuring resistance and continuity with the meter.

Maintenance and Repair Procedures

Battery and Fuse Replacement

Procedures for replacing the meter's battery and fuse.

Product Specifications - General

General, Dimensions, and Weight Specs

General specs, power, environmental, temperature, dimensions, and weight.

Product Specifications - Electrical and Safety

Safety Compliance and AC Voltage Specs

Safety compliance (LVD, EMC) and detailed AC Voltage electrical specifications.

Product Specifications - Current and Resistance

AC Current and Ohms Specs

Details AC current ranges, accuracy, and Ohms measurement specifications.