Mount
To install the Suction Cup Windshield Mount, peel the
plastic film off of the suction
cup if there is one. Twist and
unlock the buckle on the side
of the locking lever before
apply it on glass. Press the
suction cup FIRMLY onto the
windshield. Twist the locking
lever to secure the suction cup
in place. The suction cup can
be moved freely. Leave it on the windshield once it is
correctly positioned.
Drive!
Pluto SHD Dash Cams are designed to be set and
merged with environment. After initial setup, the unit will
turn on and start recording as soon as power is applied.
- 10 -
To Next Page
Loading...
