8.1.2 Video Quality
This setting is for changing the video bitrate. It will not
affect the video resolution. The better video quality it is,
the larger file size each footage will be.
8.1.3 Loop recording
You can change the video length from 1 to 10 mins in loop
recording. The system will keep 25% of memory card
space for locked video clips and 75% for the normal video
clips. And if the locked videos take up more than 25% of
the space, the oldest locked video clip will be overwritten.
Once the memory card gets full, the camera will
continuously overwrite the oldest video clip recorded. To
protect a clip so that it will not be overwritten, please
press the Emergency Lock button. And the emergency
record icon “Lock” will be shown on the screen.
8.1.4 G-sensor Level (running)
The sensitivity of G-sensor can be changed from 1
(Lowest) to 7 (highest). If any shaking or collision occurs
while recording, the camera will automatically lock up the
video in recording. A lock icon will appear on the screen.
The locked videos will be protected from covered by new
recording videos.
8.1.5 Motion Detection
- 15 -
To Next Page
Loading...
