Amrotec MiB-9 - Denomination Batch Function (DB); Changing Display Contents

19
Each Denomination associated Batch function (DB) is available with ‘SINGLE’, and ‘SORT’ modes and
can be activated or deactivated by pressing [BATCH] key. This is how they are organized: By pressing Batch
key in SINGL, or SORT, batch function will be changed as:

100 (or preset batch 1-200)

DB

All Batch Off

Once Batch Key is pressed second time, “DB” message will be displayed on LCD ensuring activation of
denomination batch function. If DB is selected, machine will count and batch the desired denomination by pre-
set batch number for each denomination. For further information on how to set up DB (Denomination Batch)
setting, please refer to 8.SET SPECIAL FUNC.

4. DENOM BATCH SET at page 44.
Changing Display Contents
The MiB-9 machine provides various information regarding counting results. Continue pressing DISPLAY key to change
screen and view various counting results. There are 5 views under this DISPLAY function:
 Simple View (Amount & piece Display)
 Piece Display in count mode
 Detail View (Amount & piece Display)
 Piece View (Detail) in count mode.
 Reject Reason view.