28
1. LANGUAGE SET
From the USER MENU, operator can select their native language if
it is available and listed on the sub-menu. Default is set as English
language for USA market.
2. COUNTING SPEED
From the USER MENU, operator can select the piece counting
“SPEED” by pressing numeric 2 key or UP / DOWN key.
The machine offers five counting speed: 800 / 900 / 1000 / 1200 /
1500 NPM (Notes per Minute). In sub menu, press corresponding
numeric key or UP / DOWN key to select your desire speed
confirmed by START/ENTER key. In COUNT mode, you can set the
speed up to 1500NPM maximum, but for all discriminating Modes,
such as MIXED, SINGL or SORT modes, machine speed is
defaulted as 1000 (CF ON) or can be change to 1200 (CF Off).
Please refer to the below table to see the compulsory maximum speed for each condition.
To Next Page
