2. SEL. OCR DATA PORT: This sub-menu option has no applicability for MIB-9 machine.
3. TCP/ IP TYPE: (Reserved for Software Developer)
4. IP Address: (Reserved for Software Developer)
5. MAC Address: (Reserved for Software Developer)
6. SDC100 PROTOCOL: (Reserved for Software Developer)
6. Sensitivity Setting (Only for trained operator/service-provider)
This is a password protected area and reserved for highly trained operator or service-provider.
1. UV 2.MR 3. IR : (Suspect Detectors)
MiB-9 is equipped with number of suspect detectors such as UV (Ultra-Violet), MR (Magneto-resistive / MG)
and IR(Infra-red). Proper sensitivity settings for these detectors are preset from factory, however, if it
To Next Page
