UK-9
iPod & iPhone OPERATIONS
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is “ OFF ”.
1. Press and hold [DISP] button to enter
system setup.
2. Press [ ] or [ ] button to select
“ S-CTRL”.
3. Rotate the [VOLUME] knob to select
“ ON ” or “ OFF ” .
ŖON: Operations are made through your iPod.
ŖOFF: Operations cannot be made through
your iPod.
Notes:
Ŗ 9JGPRGTHQTOKPIK2QFQRGTCVKQPUWUKPI
UKORNGEQPVTQNOQFGOCMGVJGQRGTCVKQPU
slowly. If repetitive operations are performed
VQQSWKEMN[WPHQTGUGGPGTTQTUOC[QEEWT
Ŗ 9JGPRGTHQTOKPIK2QFQRGTCVKQPUWUKPI
UKORNGEQPVTQNOQFGRNGCUGFQPQVQRGTCVG
VJGK2QFCPFVJGWPKVCVVJGUCOGVKOG
otherwise there may be unexpected event
happened.
Ŗ 5QOGK2QFOQFGNUFQPQVUWRRQTVVJKU
function. Consult your nearest dealer or
website to confirm which models do not
support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1. Press the [AMS /
] button to select the
iPod menu mode.
2. Press the [VOLUME] knob to switch between
categories.
/75+%2.#;.+56#46+565#.$7/5
)'04'5510)5%1/215'45
8+&'1/18+'5/75+%8+&'1568
5*1958+&'121&%#5654'06#.5
3. Press the [VOLUME] button. (The contents
QHVJGECVGIQT[CTGFKURNC[GF
4. Press and hold the [ DISP ] DWVVQPUGE
5. Rotate the [VOLUME] knob to select the
desired letter to search.
6. Press the [DISP] button again to next perform
search.
7. Press the [ VOLUME?DWVVQPVQEQPſTO