To Next PageTo Next Page
Need help?Do you have a question about the AMS Sensit 3 and is the answer not in the manual?
General| Manufacturer | AMS (Automatic Merchandising Systems) |
|---|---|
| Payment Systems | Coin, bill, credit/debit card |
| Refrigeration | Yes |
| Display | LCD |
| Type | Glass Front Snack and Drink Vending Machine |
Overview of the Sensit 3 vending system and its core features.
Details on health and safety specifications and software.
Information on Energy Star compliance and energy efficiency.
Guide to identifying vendor models and serial numbers.
Recommended operating conditions for the vendor.
Detailed physical dimensions for Model 35 and Model 39.
Weight specifications for Model 35 and Model 39.
Capacity details for Model 35 and Model 39.
Electrical power specifications for different regions.
Data on daily energy consumption for various models.
Details on refrigerants used and HP ratings.
Support for MDB and Executive protocol devices.
Supported function and option levels for MDB devices.
Information on patents covering the vendor's components.
AMS commitment to product safety and technician training.
Precautions for working with high voltage components.
Importance and procedures for grounding electrical components.
Safety measures when working with internal fans.
Safety related to helix movement and potential jamming.
Hazards and precautions regarding refrigerant release.
Risks and precautions to prevent vendor tipping.
Hazardous conditions from improper vendor use or service.
Information on the GFCI protection system.
How the Sensit 3 system operates during a vend cycle.
Location and function of the control board.
Procedure for upgrading firmware using a micro SD card.
How to use the mode switch to access service modes.
Explanation of primary and secondary vend sensors.
Details on the primary sensor's function and placement.
Description of various door-related components like display, keypad.
Information on the chiller system and its controls.
Description of the adjustable tray support rails.
Initial description of trays and vend motors.
Types of vend motors used and their configurations.
Characteristics and installation of S3 vend motors.
Information on Sensit II vend motors and their status.
Available helix sizes and pitches.
Components and location of the electrical panel.
Description of the optional powered ventilation system.
Information on the optional 1.5" helix tray.
Procedures for checking electrical outlets before connection.
Electrical requirements for CE compliance.
Steps for inspecting the vendor for shipping damage.
How to mount MDB bill validators and card readers.
How to mount MDB coin changers.
Order and method for connecting MDB devices.
Steps to configure vend motors after changes.
Testing product fit and configuring trays for vending.
Process for installing price labels on trays.
How to change prices by scrolling the price tape.
Steps to enter and set prices in the vendor.
Instructions for removing shipping boards.
Guidelines for positioning the vendor.
Procedure for leveling the vendor for safe operation.
How to install the false leg to prevent tipping.
Steps for removing snack, candy, and food trays.
Instructions for removing bottle trays.
Adjusting tray positions vertically.
Configuring columns for different product types.
How to change and reposition tray dividers.
Procedures for changing helices.
Installation and removal of the helix adapter.
Function and positioning of the helix ejector.
Installation of helix alignment devices.
Adjusting motor positions and setting home.
Removal and installation of the bottle tipper bar.
Tips for loading products to prevent hang-ups.
How to vend tall products using a candy pusher bar.
Installing the candy pusher bar.
Separating product columns with dividers.
Adjusting and loading the optional 1.5" helix tray.
How to enter and exit the service mode.
How to view and interpret error codes.
Accessing and viewing sales and accounting data.
Options for dispensing products and handling coins.
Setting delays for product sales.
Setting and monitoring vendor temperature.
Performing health and safety tests.
Exempting selections from Health & Safety restrictions.
Setting prices for products and value vending.
Configuring motors, linking motors, and motor types.
Linking selections for sequential vending.
Changing motor stop and credit deduction behavior.
Detailed descriptions of motor types.
Programming a delayed stop for motors.
Configuring motors after changes to arrangement or quantity.
Creating coupled motor sets for wide products.
Forcing a selection before allowing a refund.
Control for allowing short-changed transactions.
Functionality for bill insertion and coin refund.
Holding credit after a failed vend.
Encouraging repeat purchases with remaining credit.
Treating coin changer as a Level 2 device.
Adding value to customer cashless accounts.
Option to display or hide transferred card value.
Handling credit refunds to cashless devices.
Conditions for MDB devices being out-of-service.
Operation with a bill validator and no coin mech.
Customizing the scrolling display message.
Setting up free product giveaways after successful vends.
Selecting primary and secondary display languages.
Using the product sensor to detect product in the bin.
Enabling speech synthesizer for user feedback.
Programming a custom serial number for the machine.
Defining time periods for blocking product sales.
Setting current time and date for logs and records.
Adjusting time for Daylight Savings.
Controlling display of current time when idle.
Choosing between 12-hour and 24-hour time format.
Activating the EnergySensit feature.
Deleting past sales activity history.
Setting the temperature change value for EnergySensit.
Defining the repeating cycle time for EnergySensit.
Adjusting historical data usage for predictions.
Setting the delay time for product warming/cooling.
Controlling vendor lighting based on activity.
Adjusting LED lighting brightness.
Understanding and clearing "OUT OF SERVICE" messages.
Managing health and safety conditions and temperature limits.
Identifying and resolving machine error codes.
Table detailing error codes, causes, and solutions.
Procedure to reset and clear jammed motor errors.
Addressing water formation issues within the cabinet.
A chart matching symptoms to possible causes and remedies.
Information on SD cards and firmware update process.
Steps to upgrade firmware from AMS website.
Saving and transferring configurations via micro SD card.
Procedures for cleaning the refrigeration unit.
Cleaning the fixed bottom screen.
Cleaning the removable bottom screen.
General cleaning of the vendor's exterior.
Cleaning the vendor's interior surfaces.
Lubrication points for trays and helix.
Replacing fluorescent bulbs and LED lamps.
Procedure for defrosting the evaporator coil.
Testing temperature system and Health & Safety features.
Information on the PC-based Sensit 3 utility program.
Procedure for replacing power cords and testing GFCI.
Instructions for storing the vendor without power.
Wiring diagram for snack and non-energy star models.
Wiring diagram for Energy Star models.
DEX fields related to bill validators.
DEX fields related to coin changers.
DEX fields related to the control board.
DEX fields related to cashless device 1.
DEX fields for discounts and surcharges.
DEX fields for cash overpayments.
DEX fields for cash added to the system.
DEX fields for coin tube contents.
DEX fields for read counts and door events.
DEX fields for event identification and timing.
DEX fields for read counts and interrogator data.
DEX fields for product identification and pricing.
DEX fields for various settings like passwords and reset modes.
DEX fields for included sets and transaction control.
DEX fields indicating machine status and failures.
DEX fields for product number, price, and identification.
DEX fields indicating selection status (e.g., unplugged motor).
DEX fields for products vended and sales values.
DEX fields for free vending counts and values.
Kit for installing a candy pusher bar.
Kits for small helix and 4" helix cup rails.
Kit for a 110V ventilator for 35" units.
Various chiller kits for different voltage and unit sizes.
Kit for a banking spacer.
Kit for installing a false leg.
Kit for dual pane glass for 35" windows.
Harness for chip programming.
S3 Utility programming software.
Various LED light kits for different models and configurations.
High capacity tray kits for 39" units.
Kit for a mini dispenser.
Kit for converting to scrolling prices.
Kit for EnergySENSIT lighting installation.
Configuration options for MDB devices.
Configuration settings for vendor features.
Settings for blocking product sales during specific times.
Configuration of time, date, and daylight savings.
Enabling or disabling free vending.
Configuration of the auxiliary output signal.
Accessing and reviewing data logs.
Settings for energy saving features.
Accessing and viewing error codes.
Accessing and viewing accounting data.
Options for product dispensing.
Setting delays for product sales.
Adjusting and monitoring vendor temperature.
Setting product prices.
Configuring trays, motors, and linked selections.
