AMSEC SafeWizard II - To Open Doors; Changing PIN; Adding Users

To Open Doors
1.LogIntoaccessmainmenu
2.Pressthesoftgreykeybelowthe“OpenDoor#”desired.
2a.(Optional)Press1forDoors,thenpresstheDoor#desiredandpressEnter.If
authorizedtoopendoors,accesswillbegranted.
If a door is programmed with Time Delay:
1. FollowthesamestepsasabovetologinandaccessDoorsMenu.
2. Ifthedoorselectedhastimedelay,waitfortheTimeDelaycountertoreachthe
presetvaluecountingup.
4. Thescreenwilldisplay“LogintoOpen”withacountdownofthetimetoLogin
again.ProceedwithLoginbeforethetimerexpiresandopendoor.
Changing PIN
1. Login.
2. Press3-Admin.
3. Press5-ChangeYourPin.Enteryourold6-digitPin,pressEnter
4. Enteranew6-digitPIN.
5. Enterthesame6digitstoconrm,pressEnter.
Thescreenwillrevertbacktothemenu,yourpinhasbeenchanged.
Adding Users (Restricted to Authorized User Levels)
1. Login.
2. Press3-Admin.
3. Press1-UserManagement
4. Press1-AddNewUser
5. SelectValidationMode,PinOnly,KeyOnly,orKeyandPin.
 *IfPinOnly,payattentiontothe2-digitI.D.number.Thatwillberequiredalong
withthe6-digitPINnumber.
 *IfaddingaUserwithakey,presentkey
6. EnterUser’sname,pressEnterwhennished.