EasyManua.ls Logo

amspray DSP 1550 Series - User Manual

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DSP 1400/1550/1700/1900/2100 Series
High-Performance Airless
Sprayer
Owners Manual • Notice d’utilisation • Manual del Propietario
Attach the return hose.
Attacher le tuyau de retour.
Fije la manguera de retorno.
Attach the tip.
Attacher la tête de pulvérisation.
Fije la boquilla.
Attach the suction set.
Attacher l'ensemble d'aspiration.
Fije el equipo de succión.
EnglishFrançaisEspañol
1-800-880-0993
Wagner Technical Service
Need help? Call us first for answers fast.
Call Wagner Spray Tech toll-free if you have any
comments or problems with this product.
1770 Fernbrook Lane, Minneapolis, MN 55447
http://www.wagnerspraytech.com
Visit us on the world wide web!
Quick-start
Easy does it from setup to cleanup:
Printed in the U. S. A.
0601 Form No. 0512750B
1
2
3
4
5
6
7
8
9
10
Read all WARNINGS!
Lire toutes les mises en garde!
¡Lea todas las advertencias!
Attach the paint hose.
Attacher le tuyau à fluide.
Fije la manguera de fluido.
Lubricate the packings.
Lubrifier les garnitures.
Lubrique las empaquetaduras.
Purge and prime the system
Amorcer la pompe.
Cebe la bomba.
Spray
Pulvériser
Atomice.
Store temporarily OR clean up
Ranger de façon temporaire OU nettoyer.
Almacene temporalmente O limpie.
Maintain
Faire l'entretien.
Mantenga (De mantenimiento).

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the amspray DSP 1550 Series and is the answer not in the manual?

Summary

Safety Precautions

General Warnings and Cautions

Highlights potential hazards and essential safeguards for sprayer operation from AWARNING/ACAUTION boxes.

Injection Hazard Details

Details severe risks of high-pressure paint injection injuries and need for immediate medical attention.

Fire and Explosion Hazards

Outlines preventive measures against fire/explosion risks from flammable vapors and ignition sources.

Thermal Overload Caution

Warns about the thermal overload on DSP 1400/1550 and fuse on other models.

Material and General Safety

Material Compatibility Hazards

Warns about property damage/injury from using incompatible materials with sprayer components.

Vapor Hazards & PPE

Details health risks of vapors and the need for appropriate personal protective equipment.

General Operational Safety Rules

Covers safety rules, codes, and importance of using authorized parts for safe operation.

Electrical Grounding

Grounding Requirements & Safety

Explains necessity and procedure for proper electrical grounding to prevent shock hazards.

Sprayer Specifications

Weight & Fluid Capacity

Lists weight and fluid capacity specs for different sprayer models.

Power Source & Requirements

Details sprayer's power source, motor specs, and electrical requirements.

Pressure & Material Capability

Specifies max spraying pressure and types of materials the sprayer handles.

System Components

Shipping Carton Contents

Lists items included in the shipping carton for the painting system.

Product Description

High-Performance Sprayer Overview

Provides a general description of the high-performance piston pump sprayer.

Controls & Functions

Operator Controls Explanation

Explains ON/OFF switch, PRIME/SPRAY knob, and Pressure Control Dial operations.

Equipment Setup

Handle & Bracket Attachment

Instructions for attaching handle and pail bracket to the cart model.

Spray Gun Trigger Lock

Explains how to lock and unlock the spray gun trigger for safety.

Spray Tip Attachment

Guides on correctly threading and tightening the spray tip onto the gun.

Spray Gun Filter Selection

Guidance on selecting the appropriate spray gun filter based on tip size.

Hose & Suction Set Attachment

Instructions for connecting paint hose, suction set, and return hose.

Connecting to Power

Power Supply Connection

Details on plugging the sprayer into a properly grounded outlet or extension cord.

Pressure Relief Procedure

Pressure Relief Steps

Outlines procedure for safely relieving pressure before servicing or cleaning equipment.

Pump Priming

Pre-Priming Lubrication

Instructions for adding lubricant to the pump to prolong seal life before priming.

Pump Purging & Priming

Step-by-step guide to purge test fluid and prime the pump for latex paint.

Spray Hose Purging & Priming

Hose Purging Procedure

Procedure to purge air, water, or solvent from the spray hose and ensure paint flow.

Spraying Operation

Spraying Technique

Guidance on achieving even coating using proper arm movement, speed, and distance.

Spray Pattern Adjustment

Tips on checking spray pattern and adjusting pressure for optimal results.

Cleaning Procedures

Spray Gun Filter Cleaning

Instructions on cleaning the spray gun's internal filter to maintain paint flow.

Spray Gun Filter Replacement

Steps for replacing the spray gun filter assembly.

Spray Tip Unclogging

Procedure for clearing spray tip blockages using its reversible function.

Spray Tip Cleaning

Detailed steps for removing, cleaning, and reassembling the spray tip assembly.

Storage and Cleaning

Suction Screen Cleaning

How to clean the screen at the bottom of the suction set.

Short-Term Storage Procedure

Steps for preparing sprayer for storage up to 16 hours, especially for latex paints.

Long-Term Storage Prep

Detailed instructions for cleaning and preparing sprayer for extended storage (over 16 hours).

Suction Tube Cleaning

Steps to clean the suction tube before long-term storage.

Paint Hose Cleaning Procedure

Method to flush paint from the paint hose using water or solvent.

Extended Maintenance & Accessories

Long-Term Lubrication

Details on lubricating the pump with household oil for long-term storage.

Pump Part Replacement

Info on available repair kits for worn pump parts and maintenance indicators.

Accessory List

Lists various accessories available for the sprayer, including hoses, guns, and extensions.

Fluid Section Seal Replacement

Fluid Section Disassembly

Step-by-step guide for disassembling the fluid section of the sprayer.

Fluid Section Assembly

Instructions for reassembling the fluid section with new seals and parts.

Parts List

GX-06;07 Gun Parts

List of part numbers and descriptions for the GX-06/07 spray gun.

G-08 Gun Parts

List of part numbers and descriptions for the G-08 spray gun.

G-10 Gun Parts

List of part numbers and descriptions for the G-10 spray gun.

Troubleshooting Guide

Sprayer Not Starting

Troubleshooting steps for when the sprayer fails to start, covering power and motor issues.

Priming & Paint Draw Issues

Solutions for sprayer not drawing paint or losing prime.

Pressure Drop During Spraying

Addresses causes and solutions for pressure drops when the gun is triggered.

Flow Through Return Tube

Troubleshooting steps when flow observed through return tube while on SPRAY.

Spray Gun Leaks

Diagnosing and fixing leaks from the spray gun assembly.

Spray Gun Not Spraying

Solutions for when the spray gun fails to spray, often due to blockages or settings.

Paint Pattern Tailing

Fixes for tailing paint patterns, usually related to pressure or blockages.

Limited Warranty

Warranty Terms & Conditions

Details the one-year limited warranty against defects in material and workmanship.

Warranty Limitations & Exclusions

Outlines what the warranty does not cover, such as improper use or normal wear.

Legal Rights & Variations

Explains consumer legal rights and how warranty may vary by state or province.

amspray DSP 1550 Series Specifications

General IconGeneral
TypeAirless Paint Sprayer
Power SourceElectric
Hose Length50 ft
Voltage120 V
Tip Size0.015 in

Related product manuals