EasyManua.ls Logo

amspray DSP 1700 Series - User Manual

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DSP 1400/1550/1700/1900/2100 Series
High-Performance Airless
Sprayer
Owners Manual • Notice d’utilisation • Manual del Propietario
Attach the return hose.
Attacher le tuyau de retour.
Fije la manguera de retorno.
Attach the tip.
Attacher la tête de pulvérisation.
Fije la boquilla.
Attach the suction set.
Attacher l'ensemble d'aspiration.
Fije el equipo de succión.
EnglishFrançaisEspañol
1-800-880-0993
Wagner Technical Service
Need help? Call us first for answers fast.
Call Wagner Spray Tech toll-free if you have any
comments or problems with this product.
1770 Fernbrook Lane, Minneapolis, MN 55447
http://www.wagnerspraytech.com
Visit us on the world wide web!
Quick-start
Easy does it from setup to cleanup:
Printed in the U. S. A.
0601 Form No. 0512750B
1
2
3
4
5
6
7
8
9
10
Read all WARNINGS!
Lire toutes les mises en garde!
¡Lea todas las advertencias!
Attach the paint hose.
Attacher le tuyau à fluide.
Fije la manguera de fluido.
Lubricate the packings.
Lubrifier les garnitures.
Lubrique las empaquetaduras.
Purge and prime the system
Amorcer la pompe.
Cebe la bomba.
Spray
Pulvériser
Atomice.
Store temporarily OR clean up
Ranger de façon temporaire OU nettoyer.
Almacene temporalmente O limpie.
Maintain
Faire l'entretien.
Mantenga (De mantenimiento).

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the amspray DSP 1700 Series and is the answer not in the manual?

Summary

Quick-start Guide

Safety Precautions

Injection Injury Hazard

High-pressure paint stream can pierce skin, leading to serious injury. Seek medical attention.

Explosion and Fire Hazard

Solvent and paint fumes can explode or ignite, causing property damage or severe injury.

Additional Safety Precautions

Hazardous Materials and Vapors

Inhaling or contacting paints, solvents, or insecticides can cause severe nausea, fainting, or poisoning.

Grounding Instructions

Proper grounding reduces the risk of electric shock during use and prevents static discharge.

Product Overview and Specifications

Specifications

Details on weight, capacity, power source, pressure, safety features, and spray capabilities.

Components and Controls

Lists shipping contents, general description, and explains controls like ON/OFF switch and spray knobs.

Setup Procedures

Attaching Gun Components

Instructions for attaching the spray tip, paint hose, and suction set to the spray gun.

Gun Trigger Lock

Explains how to lock and unlock the spray gun trigger for safety during setup and use.

Choosing Spray Gun Filters

Guide to selecting the correct spray gun filter based on tip size for optimal performance.

Priming and Pressure Relief

Pressure Relief Procedure

Essential steps to relieve pressure before servicing, cleaning, or preparing for cleanup.

Purging and Priming the Pump

How to purge test fluid and prime the pump, especially for latex paint applications.

Spraying Operation

Purging Spray Hose

Steps to purge air, water, or solvent from the spray hose after pump priming.

Spraying Technique

Guidance on achieving an even coat by maintaining consistent speed, distance, and overlap.

Cleaning Procedures (Part 1)

Cleaning Spray Gun Filter

How to clean the spray gun filter to maintain paint flow and prevent pattern distortion.

Spray Tip Maintenance

Instructions for unclogging, changing, and cleaning the spray tip for optimal spray patterns.

Cleaning Procedures (Part 2)

Suction Set and Hose Cleaning

Steps for cleaning the suction set screen, suction tube, and paint hose for proper operation.

Storage Procedures

Guidelines for short-term (up to 16 hours) and long-term storage of the sprayer.

Maintenance and Accessories

Long-term Storage Preparation

Final steps for lubricating and preparing the pump for extended periods of non-use.

Extended Maintenance and Parts

Information on replacement parts, repair kits, and accessories for the sprayer.

Fluid Section Seal Replacement

Disassembly of Fluid Section

Step-by-step instructions for disassembling the fluid section to access seals.

Assembly of Fluid Section

Detailed guide for reassembling the fluid section with new seals and components.

Parts Lists - Gun Assemblies

GX-06;07 and G-08 Gun Parts

Lists and diagrams of parts for the GX-06/07 and G-08 spray guns.

G-10 Gun Parts

Lists and diagrams of parts for the G-10 spray gun.

Parts Lists - Suction Sets and Cart

Suction Set and Paint Hose Parts

Lists and diagrams of parts for the suction set and paint hose assemblies.

Cart Assembly Parts

Lists and diagrams of parts for the sprayer cart assembly.

Troubleshooting

Starting and Paint Draw Issues

Solutions for problems like the sprayer not starting or failing to draw paint when primed.

Spray Pattern and Leakage Issues

Troubleshooting for pressure drops, gun leaks, tip assembly leaks, and tailing paint patterns.

Limited Warranty

Warranty Terms and Conditions

Details the warranty period, coverage, limitations, and legal rights for the airless paint spray equipment.

amspray DSP 1700 Series Specifications

General IconGeneral
Brandamspray
ModelDSP 1700 Series
CategoryPaint Sprayer
LanguageEnglish

Related product manuals