To Next PageTo Next Page
Need help?Do you have a question about the amspray DSP 1900 Series and is the answer not in the manual?
Visual guide for basic operation from setup to cleaning.
Details high-pressure paint stream hazards and immediate medical attention required.
Covers risks from flammable vapors, ignition sources, and ventilation needs.
Warns about materials that can cause damage or injury due to chemical incompatibility.
Information on protecting yourself from harmful paint and solvent vapors.
Covers general operating precautions, codes, and using authorized parts.
Essential steps for safe electrical grounding and extension cord usage.
Details weight, capacity, power source, pressure, and spray capabilities.
Lists the parts included in the shipping carton for the painting system.
Explanation of the ON/OFF switch, PRIME/SPRAY knob, and Pressure Control Dial.
Instructions for attaching the handle to the cart model.
Steps for attaching the pail bracket to the cart model.
How to lock and unlock the spray gun trigger for safety.
Procedure for safely attaching the spray tip to the gun.
Guidance on choosing the appropriate gun filter based on tip size.
Steps for securely attaching the high pressure paint hose.
Instructions for attaching the suction tube and return hose.
Instructions for safely connecting the sprayer to a power source.
Essential steps to relieve pressure before servicing or cleaning.
How to prepare the unit for priming by adding hydraulic oil.
Detailed steps to purge test fluid and prime the pump with latex paint.
Steps to purge the spray hose after pump priming.
Guidance on achieving an even coating with proper stroke and distance.
Advice on practicing spraying technique for best results.
Instructions for cleaning the filter to maintain paint flow and pattern.
Steps for replacing the spray gun filter assembly.
Procedure to clear obstructions from the spray tip using its reversible function.
Detailed steps for removing and cleaning the spray tip assembly.
How to clean the screen at the bottom of the suction set.
Steps for preparing the sprayer for storage up to 16 hours.
Comprehensive cleaning and preparation for storage exceeding 16 hours.
Instructions for cleaning the suction tube after use.
Steps to flush and clean the paint hose.
Procedure for cleaning the spray gun after use.
The only daily maintenance required is thorough cleaning.
Information on parts replacement and available repair kits.
List of optional accessories for the sprayer system.
Guide to selecting the correct spray gun filter based on tip size.
Step-by-step instructions for disassembling the fluid section of the pump.
Detailed steps for reassembling the fluid section with new seals.
List of part numbers and descriptions for the GX-06/07 spray gun.
List of part numbers and descriptions for the G-08 spray gun.
List of part numbers and descriptions for the G-10 spray gun.
Diagram and parts list for the suction set assembly.
Diagram and parts list for the suction set assembly for model 1400.
Part numbers and descriptions for paint hoses.
Diagram and parts list for the cart assembly.
Troubleshooting steps for when the sprayer fails to power on.
Diagnosing issues when the unit primes but fails to draw paint.
Resolving issues where pressure decreases after gun trigger activation.
Addressing flow issues in the return tube when set to SPRAY mode.
Troubleshooting leaks from the spray gun assembly.
Diagnosing and fixing leaks in the spray tip assembly.
Steps to take when the spray gun fails to dispense paint.
Solutions for a tailing paint pattern, often related to pressure.
Terms and conditions of the one-year limited warranty for airless paint spray equipment.
French version of the limited warranty terms and conditions.
Spanish version of the limited warranty terms and conditions.
General| Type | Airless Paint Sprayer |
|---|---|
| Power Source | Electric |
| Max. Working Pressure | 3000 PSI |
| Maximum Pressure | 3000 psi |
| Voltage | 120 V |
| Flow Rate | 0.47 GPM |
