for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer indicator
shows “- -” when the set time finished.
Setting the timer to turn one cooking zone off
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 2#)
2. Touch timer control , The minder indicator
will start flashing and “30” will show in the
timer display.
3. Set the time by touching the “-” or “+” control of the timer
Hint: Touch the “-” or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer will decrease
or increase by 10 minutes.
4. Touching the heating zone selection control, and then touch the “Timer”, the timer is
cancelled, and the“--” will show in the minute display.
5.When the time is set, it will begin to count
down immediately. The display will show the
Remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
To Next Page
Loading...
