Analog way VIO 4K Tpp Programmer Guide

9
VIO 4K TPP PROGRAMMER'S GUIDE FOR v02.00.7X
2.4.5 Error answer
When an invalid read or write command string is received, the device immediately answers with one of
the following error string.
Picture 4: Error answer example
Error message structure:
An error message is made of the capital letter E followed by a 2 digits value depending on the error and
is ended with
C
R
L
F
characters. (ASCII 0x0D and 0x0A)
Here are returned error code and conditions covered:
 E10: means “register name error”. It is usually due to a command field (i.e. five letters) that does
not match any legal command string.
 E11: means “index value out of range”. It is usually due to a wrong index value.
 E12: means “index number error”. It is usually due to an incorrect number of indexes, too or not
enough.
 E13: means “value out of range”. It is usually due to a wrong value in a writing command.

Analog way VIO 4K Specifications

General

Brand	Analog way
Model	VIO 4K
Category	Media Converter
Language	English