3.4 11M
A snapshot of the emission systems operations for all OBD II vehicles -
i.e., misfire monitor, evap systems monitor and more. Choose [11M]and
it displays as follow:
Readiness
DTC Lookup
3.5 BAT Check
I/M Readiness
BAT Check
IGN
MIL
MIS
CCM
CAT
HCAT
Spark
Ø
DTC
PdDTC
EVAP
AIR
02S
EGR
x
x
The function is used to read real time battery voltage. From the Main
Menu, use the left / right scrol button to select the BAT menu and press
the 0K button. the screen will display the interface as shown below•
BAT
OTC
Please turn off the engine.
BAT Check
Turn off engine
7
To Next Page
