HD Series
18
Pin Detect
This function mainly measures the voltage of 16 PIN of OBD
diagnostic interface, and judges the pin position of K- line and
CAN line.
After connecting the OBD interface of vehicle, click the main
interface 【Tools】 to select pin detection. The program
automatically measures the 16pin voltage of OBD diagnosis
interface, and judges the pin position of K-line and can line, as
shown in the figure below:
Data Management
【Data Management】The function is used to save and view
test reports, screenshots and problem feedback files. Most of
the files are generated by executing the toolbar operation of the
vehicle diagnosis interface.
To Next Page
Loading...
