[UP] SCROLL BUTTON - in menu mode, move up through
the menu and submenu items. When retrieving data for more
than one screen, by moving the screen up to the previous
screen for more data.
@ [DOWN]SCROLLBUTTON- in menumode,usingthe menu
and submenu items to move down. If retrieving data for more
than one screen, move down the screen to the next screen for
more data.
@ OBD-16PIN CONNECTOR - Connects the scan tool to the
vehicle's Data Link Connector (DLC).
@ [11M]BUTTON - Quick State Emissions Readiness Check and
Drive Cycle Check.
11M Readiness
IGN Spark
CtDTC O
MIS
HCCAT
PdDTC
EGS
EGR
Remarks:
MIL Yellow- Dashboard MIL ON
MIL Gray Dashboard MIL OFF
Ø -not support
4/ -complete
X -not complete
@ [READ DTC] BUTTON - Quick readout of the vehicle's fault
code.
4. Diagnose
4.1 Job menu
OBDII
For JLR
Reset Oil
This option provides a quick way to check the
codes of the engine light.
Professional diagnostic tool for Land Rover and
Jaguar.
hot key: After an oil change, you need to reset
the oil indicator.
4 EN
To Next Page
Loading...
