This document is an instruction manual for the ANCHEER E-Bike, a folding electric bicycle designed for urban commuting and outdoor activities.
Function Description
The ANCHEER E-Bike is an electric bicycle that provides pedal assistance, making riding easier and more enjoyable, especially for longer distances or uphill climbs. It combines traditional cycling with electric power, offering various levels of assistance. The bike is designed for safe and effective use, with features that ensure a comfortable and secure riding experience. It is suitable for people aged 16 and above who are physically fit.
Important Technical Specifications
The ANCHEER E-Bike has several key technical specifications:
- Package Size: 15605801150mm
- Wheel Size: 20*1.75 Inches
- Frame Material: Aluminium Alloy
- Maximum Load: 265 lbs (120KG)
- Vehicle Weight: 49 lbs (22KG)
- Maximum Speed: 15 mph (25km/h)
- Maximum Gradient: 10 Degrees
- Rear Derailleur: 7-Speed
- Average Mileage: 15~25 miles (25-40 km)
- Working Temperature: 23°F-104°F (-5℃~40℃)
- Rated Voltage: 36V
- Battery Capacity: 8Ah
- Service Life: 500 Times
- Motor Power: 250W
- Motor Type: Brushless Gear Motor
- Maximum Torque: 34N.m
- Input Voltage: 100-240V
- Input Current: 1.8A
- Output Voltage: DC42V
- Output Current: 2A
- Display: LED Display
- Brake: Disc Brake
- Suspension: Suspension Front Fork
- Light: Front Light
- Tire Pressure: Recommended tire pressure is 35-45PSI.
The bike comes with a user manual, two keys, a charging adapter, one battery, two pedals, one saddle, one saddle tube, a tools bag, front and rear fenders, and a reflector.
Usage Features
The ANCHEER E-Bike is designed for ease of use and safety.
- Before Riding: Always check the front and rear brakes, handlebar fastening, front and rear wheels, and reflector for damage or contamination. Ensure the rotating shaft is lubricated.
- Riding Conditions: Avoid traveling in severe weather. In rain or snow, braking distance will be extended, so pay attention to slowing down. The maximum load capacity is 120KG.
- Safety Precautions:
- Do not use the product before reading the instructions.
- Do not lend the product to people who cannot operate it.
- The E-bike is not for off-road vehicles or extreme bicycle sports.
- Wear a safety helmet and protective gear.
- Abide by traffic rules and prohibit riding on motorized lanes and roads with multiple pedestrians.
- Comply with laws and regulations regarding parking, evacuation stairs, walkways, and entrances/exits.
- Charge and park in outdoor dedicated parking areas, avoiding rain and away from combustibles.
- Do not change the default speed setting of the electric bicycle.
- Do not exceed speed limits in accordance with traffic rules (15km/h on non-motorized lanes, downhills, and paved roads).
- Adjust the handlebar or saddle carefully to avoid exceeding safety line markings.
- Check tire pressure (35-45PSI).
- Check the power circuit, lighting circuit, etc., before riding.
- Brake Adjustment: The brake cables are properly inserted into the brake levers. If the disc rotor is bent or damaged, replace it. Adjust the caliper body to ensure the brake cable is not too sensitive and the brake pads do not rub against the disc rotor.
- Shifting Recommendations: For starting and low-speed riding, use a low-speed gear. At higher speeds, a higher gear should be selected.
- Installation and Adjustment:
- Handlebar: Install the handlebar into the folding stem and fasten the buckle. Adjust the height to suit your riding position, ensuring not to exceed the limit line.
- Front Wheel: Loosen the fixing rod of the front fork and remove it. Remember to take out the protective gasket from the brake before installing the front wheel. Pull the wheel up and insert it into the fork dropout, then insert the disc into the disc brake slot. Tighten safety washers and screws.
- Pedals: Install the right pedal ("R") on the right side crank and the left pedal ("L") on the left side crank. Ensure threads are fully seated and tightened with a wrench.
- Seat: Insert the seat post into the post receiver, set the correct position, and adjust the height. Tighten the seat with a clamp.
- Billboard: Install the billboard.
- Handlebar Components: Adjust the angle of the brake lever, meter, gear shifter, throttle, and light-horn switch on the handlebar, then use tools to tighten them.
- Folding: Spin the buckle and open the quick release to fold the frame.
- Meter Operation: The meter displays assistance levels (Low, Mid, High) and battery indicator.
- To switch on/off: Hold the "M" key for 2s. The default value is "low" pedal assist level.
- To increase pedal assist: Press "+" to increase to "mid" level.
- To move into high pedal assist: Press "+" again to move into "high" level, which is the maximum power of PAS.
- Full Electric Function (Pure electric mode): Press "-", until all three "low," "mid," "high" indicators are off.
- Operation Cautions: Avoid the risk of collision. Do not modify system parameters. Contact the seller if an error code appears.
Maintenance Features
Proper maintenance ensures the longevity and safe operation of the ANCHEER E-Bike.
- General Maintenance:
- The front and rear wheels should be located in the center of the front fork or frame.
- Store the bike in a place without sunlight and rain.
- Water showering is forbidden; clean the bike body with a semi-dry cloth.
- Do not touch the charging hole on the bicycle with metal or liquid.
- Check all cables and cable housings for fraying, breaks, rust, or corrosion.
- Check the motor and brake frequently.
- Regularly check various screws, especially the seat cushion screw (175-250), wheel screw (320-450), and chain tension.
- Always check the tire for scratches, cracks, or excessive wear.
- It is forbidden to modify key structural parts such as the frame, front fork, standpipe, and electrical function parts.
- Battery Care:
- Keep the battery out of reach of children.
- Charge at 0℃~40℃/ 32°F~104°F, and discharge at -5℃~40℃/ 23°F~104°F. Store the battery in temperatures above 35℃/ 95°F or below -5℃/ 23°F.
- Keep the battery dry, do not put the battery in acidic or alkaline liquid, and keep away from rain, fire, and high temperature environments.
- It is strictly forbidden to connect the positive and negative poles of the battery reversely, and it is strictly forbidden to damage, disassemble or short-circuit the battery.
- Used batteries are hazardous chemicals and should be disposed of by relevant professional departments.
- It is forbidden to modify the battery, electronic control system, and frame structure.
- Use the original battery. Do not replace it with other brands or products.
- Charging: Follow instructions for use. Use the original special charger.
- Insert the charger probe into the charger port on the e-bike battery.
- Insert the pronged end of the battery cord into the battery charger.
- Insert the AC plug into an AC outlet.
- The red indicator light turns on and will remain red until it is fully charged. The indicator light turns green once the battery is fully charged.
- Charging Environment: Charge in a ventilated environment, not in a confined space, residential building, or hot environment.
- The charger should not be carried with the e-bike.
- Keep the battery in a cool and dry place, and charge for two hours a month when not in use.
- Reminder: Charge a new battery 4-6 hours before first use.
- If the battery is dropped or damaged, there may be a danger of electrolyte leakage. Stop using it immediately.
- It is better not to wait until the power is completely exhausted before charging.
- Battery Disposal: Battery must be recycled or disposed of in an environmentally sound manner. Do not dispose of the battery in a fire or regular household trash.
- Warranty: ANCHEER provides a one-year limited hardware warranty. The warranty covers product defects in materials and workmanship. The warranty period is not extended if the product is repaired or replaced.
- Motor: Motor will not be able to use - 1 year warranty, free delivery of parts.
- Accelerator: Natural conditions (such as impact force cannot be used except damage) - 1 year warranty, free delivery of parts.
- Controller: Failure occurs under normal use - 1 year warranty, free delivery of parts.
- Charger: Failure occurs under normal use - 1 year warranty, free delivery of parts.
- Lithium Battery: Can't charge discharge under normal use - 1 year warranty, free delivery of parts.
- Support Services: Contact customer service for questions about the product or equipment.
- Email: support@iancheer.com
- Tel: 626-330-6285
- Monday-Friday 9:30AM-6:00PM
Need help?
To Next Page
General
