Need help?Do you have a question about the Ancheer AMA005874 and is the answer not in the manual?
General safety precautions and advice before operating the e-bike.
Specific warnings regarding weather, load capacity, age limits, and speed.
Brand introduction and company philosophy for e-bikes.
Lists all components included in the e-bike package.
Detailed diagram and list of major e-bike parts for identification.
Lists the tools provided with the e-bike for assembly and adjustments.
Guidelines for determining correct standover height for safe riding.
Pre-ride checks for power, brakes, tires, and loose parts.
Guidelines for safe riding, including gear, weather, and load.
Post-ride care, including cooling parts and cleaning.
Step-by-step guide to installing and adjusting the bicycle handlebars.
Instructions for attaching the reflector and installing the seat post and saddle.
Steps to align and tighten the front disc brake caliper.
Procedures for attaching the front wheel using the quick-release mechanism.
Crucial notes on correctly adjusting the front wheel quick-release lever for safety.
How to verify the front wheel spins freely after installation.
Detailed steps for adjusting front disc brake sensitivity and alignment.
Instructions for mounting the kickstand onto the bike frame.
Steps for attaching the front headlight and connecting its power.
Guide to correctly installing the left and right pedals onto the crank arms.
How to mount the display unit and connect its cable.
Procedure for inserting and locking the e-bike battery into its mount.
Final adjustments for handlebar controls for optimal riding position.
Important reminder to inflate tires to proper pressure before riding.
Identifies the intelligent LCD display for the e-bike and its physical appearance.
Lists the various functions and indicators provided by the e-bike display.
Diagram illustrating display areas and explaining button functions for operation.
Instructions for turning the e-bike display and system on and off.
How to switch between different information screens on the display.
How to control the e-bike's headlight using the display buttons.
Guide to selecting different levels of pedal assist and understanding modes.
Explains the battery level display and low voltage warnings.
How to interpret error codes displayed by the system and their definitions.
Procedures for trip distance reset and resetting the display to factory defaults.
Guide to custom settings, including switching display units (metric/imperial).
Important warnings regarding display usage, maintenance, and potential issues.
Essential guidelines for safely charging the e-bike battery using the original charger.
Step-by-step instructions for connecting the charger to the battery and outlet.
Critical warnings about battery handling, charging environment, and potential hazards.
Tips for initial charging, battery maintenance, and factors affecting riding range.
Guidelines for environmentally sound disposal or recycling of the battery.
Regular checks for wheel alignment, storage, cleaning, and cable integrity.
Procedures for checking motor, brakes, and brake pads for wear and proper function.
Importance of checking screws and recommended torque values for various parts.
How to check chain tension and inspect tires for wear or damage.
Warning against modifying key parts and voiding warranty.
Details of the warranty coverage, period, and exclusions for hardware defects.
Information on lifetime customer support and how to get assistance.
Specifications and technical data of the e-bike components and system.
Notes on factors affecting maximum speed and riding range.
General| Frame Material | Aluminum Alloy |
|---|---|
| Motor Power | 250W |
| Wheel Size | 26 inches |
| Type | Electric Bike |
| Max Speed | 20 mph |
| Range | 25-50 km (15.5-31 miles) |
| Brakes | Disc Brakes |
| Gearing | 21-speed |
To Next Page
