ANCHEER
11
Installation And Adjustment
5. Install the Pedals
6. Install the Kickstand
The pedal marked “R” has right-hand threads, tighten it in a clockwise direction. The
pedal marked “L” has left-hand threads, tighten it in a counterclockwise direction
(anti-clockwise).
Unscrew the screw in the kickstand, Install it and tighten the screw with tool.
5.1
6.1
Make sure the threads of each pedal are fully into the crank arm.
Make sure pedals are fully tightened with wrench.
Note: Be sure to identify R/L letters on pedal’s bolt when installing.
☛
☛
☛
To Next Page
