ANCHEER
4
GENERAL
INFORMATION
2. Tool List
For the sake of safety and comfortable
riding, when the rider stands on the ground
there should be clearance of 54cm/21in
from ground to the crotch of the rider. Also,
at least 3-8cm/1-3in between the crotch
and the top tube of the bike.
Standover height does not apply to
bicycles with step-through frames.
Instead, the limiting dimension is
determined by saddle height range.
You should adjust your saddle position
without exceeding the limit line on the
saddle tube.
0.24 inch (6mm)Allen Key
0.20 inch (5mm)Allen Key
0.16 inch (4mm)Allen Key
0.12 inch (3mm)Allen Key
Phillips - Slotted head Screwdriver
8-10 Open End Wrench
13-15 Open End Wrench
14-17 Open End Wrench
3. Standover Height
Note
To Next Page
Loading...
