ANCHEER
15
7. Install the pedals and the kickstand
There are a right pedal marked "R" and a left pedal
marked "L". When installing, make sure to identify
the R/L letter on the pedal bolt.
Ensure that the thread of each pedal is fully inserted
into the crank arm. Tighten the pedals completely
with a wrench. (Counterclockwise screw the pedal
marked "L" on the left side crank. Clockwise screw
the pedal marked "R" on the right side crank.)
Finally, find the corresponding position of the kickstand, install the kickstand and
fix it with bolts.So far, congratulations! You have completed the assembly of the
entire bike.
7.1
7.2
7.3
Installation And Adjustment
To Next Page
Loading...
