1. Installing Batteries
From base of the filter unit, remove
the protective sticker (used to protect
from water) and slide off the battery
cover. Install the 2 AAA batteries
(included) in the battery compartment
and slide back and fix both, cover and
sticker.
We have made it easy for you to install the Anchor Countertop Water
Filter. The shipped unit comes pre-installed with filter cartridge, faucet,
diverter valve, and tube. The only thing you need to do is to install
batteries, connect diverter valve to your faucet, and start enjoying the
clean refreshing water.
Installing Your Filter
This is the
diverter valve
Steps for installation:
Push & Pull Type
OUTSIDE
INSIDE
- OR -
i. Remove existing aerator from the faucet. Note the threads in your
faucet. If the threads are on the:
Aerator
2. Connecting Faucet
To Next Page
Loading...
Need help?
General