ii. Based on your faucet threads described above, connect the divertor
on the faucet as shown in the image below:
Faucet with
outside thread
- the diverter
valve should
screw right on
a.
Faucet with
inside thread
- enclosed
adapter ring
and gasket
must be used
b.
If your faucet has non-standard threads, try the
supplied universal adapter or purchase a special
adapter from your local hardware store.
After setting up the faucet, do the following:
1. Once the diverter valve is well
connected with the faucet, the
filter is ready to operate. Place
the filter unit in a convenient
location with the spout
positioned over your sink. The
spout is designed to swivel.
Countertop with filter installed
To Next Page
Loading...
Need help?
General