The element needs to be wired to single phase 220v. It should be positioned in the
tank angled to the center making sure it does not interfere with the agitator shaft
or CIP spray balls.
The Rheostat control allows you to
adjust the amount of electrical
current running to the heating
element and control the heat of the
air space. The Rheostat needs to be
installed by a licensed electrician.
The Air Space Heater fits into a 3”
sanitary ferrule and element is self
supporting. The top agitation blade
helps move the air in the head space.
Anco Electric Air Space Heater
18
To Next Page
Loading...