Anco Equipment Batch Pasteurizer - Tank Specifications and Options

Capacit
y Range:
50
-2,000 gallon
Tank
Top:
Flat
top with removable covers, Wing-Top, Dome Top with Manhole
Tank
Bottom:
Slight slope
toward outlet
Tank
Interior Shell:
C
ylindrical vertical, 11 gauge type 304 or 316 stainless steel
Interior
Finish:
N
umber 4 finish food grade
Jacket:
(1
-4 ) Zones available, 304 stainless steel full vertical side wall and
bot
tom dimple plate jacket, max. pressure rating of 70 PSI & Max.
Flow Rate 50 GPM
Insulation:
2"
polyurethane insulation
Tank
Exterior Shell:
C
ylindrical vertical, 14 gauge type 304 or 316 stainless steel
Exterior
Finish:
N
umber 4 finish
Outlet:
1.5” or 2
” leak detect valve ready
Agitation:
Bottom
Sweep, Full Sweep, Side Scrape, Curd Blade Shaft. Euro-Drive
an
d Motor with or without VSD control.
Ports:
2
" TC and 1.5” TC and Inlet port (s) available
Air
Vent:
3”
on dome top tanks only
Leg:
Three
or Four stainless steel pipe legs with adjustable ball feet
9/25/2018
4
Batch Pasteurizer Specifications and Tank Options