Andamiro PUMP IT UP SX - PUMP IT UP Troubleshooting Guide; AMP Box and Speaker Issues; Foot Assembly and Sensor Issues; Lamp and Neon Lamp Issues

AMP BOX ASS’Y
FOOT ASS’Y
LAMP ASS’Y
EXTRA
MONITOR ASS’Y
SPEAKER ASS’Y
PUMP IT UP PROBLEMS
PA RTS DESCRIPTION R E P O RTED PROBLEMS CHECK POINT CHECK NEXT
ALL LAMP ERROR OR ALL LAMPS DOWN
NO SOUND OR AUDIO
ERROR ON UPPER LEFT AND RIGHT SPEAKERS (FLW)
ERROR ON LOWER LEFT AND RIGHT SPEAKERS (WOOFER)
ERROR ON PRE AMP POWER (OUTPUT DC 15V)
NO POWER AMP PCB PRE AMP PCB (OUTPUT DC 15V)
FOOT SENSOR ERROR
INVERTER ERROR
FOOT STEP ERROR
NO LIGHT STEP ASSEMBLY (CCFL LAMP)
BLANK SCREEN CHECK AC VOLTAGE INPUT AND FUSE
DULL BRIGHTNESS ON LAMP
LIGHT ERROR (HAL OGEN LAMP)
LIGHT ERROR (NEON LAMP), LIGHT NOISE
SOUND ERROR AND NO AUDIO (FL W )
SOUND ERROR OR NO AUDIO (WOOFER)
COIN ERROR
SOUND ERROR, BACKGROUND NOISE PRESENCE
ERROR ON UPPER LEFT AND RIGHT SPEAKERS (FL W )
ERROR ON LOWER LEFT AND RIGHT SPEAKERS (WOOFER)
VOLUME CONTROL ERROR
NO LIGHT ON NEON LAMP, NEON TRANSFORMER ERROR
NO LIGHT ON LAMP
CHECK DC 12V INPUT AND LAMPS
CHECK DC 15V INPUT AND AMP PCB
CHECK AC VOLTAGE INPUT AND DC 15V OUTPUT
CHECK FOOT SENSOR AND WIRES
CHANGE LAMP AND CHECK WIRES
CHANGE NEON FOR BREAKS AND CHECK WIRE
S WAP BAD GOOD SPEAKER AND CHECK WIRE
CHECK DC VOLTAGE INPUT AND WIRE
CHECK DC 15V INPUT, PRE AMP AND WIRE
CHECK AC VOLTAGE INPUT, CHECK FOR NOEMAL “ON” AND “OFF” LED
CHECK AC VOLTAGE INPUT
CHECK DC 12V INPUT AND ACTEL CHIP IF NOT, REPLACE
LAMP PCB POWER BOX(SMPS POWER)
SMPS DC 15V
T R A N S F O R M E R
MAIN BOX (SOUND PCB)
FOOT PCB
I N V E RT E R
LAMP PCB
NEON TRANS
AMP PCB
JAMMA PCB
AMP PCB, SMPS DC 15V
TRANSFORMER, LAMP PCB
SSR BOARD
AMP PCB
SMPS DC 15V
FOOT PCB
FOOT SENSOR
I N V E RT E R
CCFL LAMP
HALOGEN LAMP
NEON LAMP
F LW SPEAKER (L, R)
WOOFER SPEAKER
COIN MACHINE
PRE AMP PCB
SSR BOARD
NEON TRANS
M O N I T OR BOARD
C R T BOARD
M O N I T OR (CRT )
MAIN BOX (MK-5BOARD)
M O N I T OR BOARD
C R T BOARD
CHECK DC 12V INPUT AND INVER T E R
S WAP BAD LAMPS TO GOOD LAMPS