PRODUCT MANUAL
68/72ST Above Deck Compact Motor
™
6
Required for installation
• Hex keys, metric (included)
• Cross head screwdrivers
• Drill bit Ø10.5mm for M10 mounting bolts (or drill bit 13/32” for 3/8” bolts)
• Drill bit Ø3mm (1/8’’)
• Hole saws Ø16mm, Ø20, Ø25mm and Ø30mm (5/8”, 13/16”, 1” and 1 3/16”)
• 8x ISO 4017-A4 M10 (3/8”) mounting bolts; (L = 15mm (5/8”) + deck thickness + thread below deck)
• 8x M10 (3/8”) locking nuts and large washers (or backing plate to match drilling template)
• Spanners: 13mm for motor and circuit breaker terminals, 17mm (9/16”) for winch mounting nuts
• Sealant / bedding compound
• Wire crimping tool/pliers
• Marine grade electrical power cables with lugs to suit your battery terminals and the M8 motor
and circuit breaker terminals
Before Installation
Before installation, record the version number of your winch and
the serial number of your motor in the space provided on the front
cover of this manual for future reference.
These details can be found as shown.
Winch production year and month [YY-MM] followed by
version number are stamped on winch base between
the mounting bolt holes.
Serial number engraved on bottom of motor.
To Next Page
Loading...
