Anderson NutriWrap 780 SB

Questions and Answers

P
Paula AustinAug 11, 2025
Why does the cut and hold not cut the plastic on my Anderson NutriWrap 780 SB Stretch Wrapping Systems?
- D
  Deborah BurtonAug 11, 2025
  If the cut and hold on your Anderson Stretch Wrapping System isn't cutting the plastic, there could be a few reasons. First, ensure the plastic film is properly set within the cut and hold system; adjustments may be needed. Second, the blade might be dull or broken, requiring replacement. Finally, check the button (round valve at the back of the wrapper) to ensure it's closed by turning it ¼ turn.
N
ndouglasAug 19, 2025
What to do if the plastic tears on the stainless folding arm of Anderson NutriWrap 780 SB Stretch Wrapping Systems?
- B
  Betty MartinAug 19, 2025
  If the plastic tears on the stainless folding arm of your Anderson Stretch Wrapping System's double stretcher system, it's likely due to a dirty or scratched arm. Try cleaning the arm. If the issue persists, the arm may be scratched and require sanding.
A
Amy AllenAug 26, 2025
Why the plastic does not hold after it is cut on Anderson NutriWrap 780 SB?
- J
  jameswilliamsAug 26, 2025
  If the plastic isn't holding after being cut on your Anderson Stretch Wrapping System, it's likely that the plastic cut and hold is not correctly adjusted.
J
Jordan PerrySep 3, 2025
How to fix the folding arm of the double stretcher if it will not lower on Anderson NutriWrap 780 SB?
- J
  John GarciaSep 3, 2025
  If the folding arm of the double stretcher on your Anderson Stretch Wrapping System won't lower, the valve of the double stretcher might be closed. Try opening the valve.

Anderson NutriWrap 780 SB Specifications

General

Brand	Anderson
Model	NutriWrap 780 SB
Category	Stretch Wrapping Systems
Language	English

Anderson NutriWrap 780 SB - User Manual

Table of Contents

Questions and Answers

Anderson NutriWrap 780 SB Specifications