3
damaged, or dropped into water. Return the appliance to an
Andis authorized service station for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken blade or
comb, as injury to the skin may occur.
9. To disconnect turn control to OFF then remove plug from
outlet.
10. If this clipper has means for grounding, connect to a
properly grounded outlet only. See Grounding Instructions.
11. WARNING: During use, do not place or leave appliance
where it may be (1) damaged by an animal or (2) exposed
to the weather.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
FOR CLIPPERS WITH A 2-PRONG PLUG
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
FOR CLIPPERS WITH A 3-PRONG PLUG
GROUNDING INSTRUCTIONS: This appliance should be grounded. In the event of
an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a
grounding wire with an appropriate grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
To Next Page
Loading...
Need help?
General
