Page 10
Room Placement
As with any sound system, where it’s placed in your room affects how well the
emitted from both sides and the front of the unit, so be careful not to block the
sound from the sides. Although placement of Spinbase is less complex than a
typical component system, following these simple guidelines will result in the
most enjoyable sound quality.
• To ensure the most even sound coverage, try to place system near the
center of one of the walls. It should be at, or slightly below, ear height for
a seated listener.
• Using the optional Spinstand will place the system at the ideal height in
most rooms.
• If the unit will be placed in a corner, angle it at 45-degrees so that the
speakers on one side are not blocked.
• Keep the sides of the unit unobstructed by solid objects for as much
distance as practical, but by at least 12” (~30.5 cm).
• Place the unit on a solid table or component rack. DO NOT use soft
vibration isolators or place the unit on a carpet or foam surface. If the
• Avoid placing the unit in an enclosed bookshelf or cabinet, as this will
To Next Page
Loading...