EasyManua.ls Logo

andover Spinbase - Rear Panel Connections; Power Input and EQ Switch; Audio Inputs; Ground Screw and Outputs

andover Spinbase
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 7
Rear Panel Connections
POWER INPUT - -
ply into the wall outlet.
CERAMIC EQ SWITCH - 
to ON. Leave it OFF for all other inputs. See pg.8 for more detail.
LINE IN - Use this input to connect a Turntable that has a built-in Phono Preamp,
the Line-Out from a Record Player, or any Line Level source such as a CD player or
Streaming Audio accessory.
MAGNETIC PHONO INPUT - Connect to a high quality turntable equipped with a
Magnetic Phono Cartridge that does not have a built-in preamp, or has its preamp
bypassed.
GROUND SCREW - Connect the GROUND wire from turntables with this feature to
reduce hum.
HEADPHONE OUTPUT - Connect headphones here. Plugging a device into this jack
will turn off the built-in speakers.
Use this jack to connect a subwoofer, or to connect external

Power Input Ceramic EQ Switch
Line Level (Aux) Input
Magnetic Phono Input Headphone Output
Line Level or Sub OutputGround Screw

Other manuals for andover Spinbase