Andrea SG-110M - User Manual

Other manuals for Andrea SG-110M

Owner's Manual2 pages

Need help?

Do you have a question about the Andrea SG-110M and is the answer not in the manual?

Summary

Troubleshooting and Technical Service

Troubleshooting Common Issues

Addresses microphone not recording sound due to connection, software level, or muting issues.

Technical Service and Support

Provides contact information for assistance with the SG-110M microphone.

Warranty Information

Details on where to find warranty information for the SG-110M microphone.

Connecting the SG-110 M Microphone

Connection to Mobile Device

Instructions for plugging the microphone into a mobile device's audio input.

Connection to Computer

Instructions for plugging the microphone into a computer's audio input.

Connection via USB Adapter

Guide for using a USB adapter (optional) and C-300 connector for computer use.

The Andrea SG-110M Microphone is a cardioid directional microphone designed to offer high-quality audio capture for various applications. Its directional pickup pattern, often referred to as a shotgun microphone, focuses on sound coming from the front, minimizing ambient noise from the sides and rear. This characteristic makes it particularly suitable for situations where clear audio from a specific source is desired, such as voice recording, interviews, or capturing specific sounds in a noisy environment.

Function Description:

The primary function of the SG-110M is to convert sound waves into electrical signals, which can then be recorded or transmitted. Its cardioid polar pattern means it is most sensitive to sounds directly in front of it, with sensitivity decreasing as the sound source moves to the sides and rear. This directional nature helps to isolate the desired audio source, making it a valuable tool for improving audio clarity and reducing background interference. The microphone is designed to capture a wide frequency range, from 100Hz to 10KHz, ensuring that both low and high-frequency sounds are accurately reproduced. This broad frequency response contributes to a natural and full-bodied sound capture. The microphone's performance is consistent across this range, as indicated by the polar plots provided in the manual, which show a relatively stable cardioid pattern at both 100Hz and 1KHz.

Usage Features:

The SG-110M is designed with user convenience and versatility in mind, making it adaptable to a variety of recording setups and devices.

Connectivity: The microphone features a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) connector. This type of connector is widely compatible with modern smartphones, tablets, laptops, and computers that have a single shared audio port (which combines both headphone output and microphone input). This universal compatibility simplifies the connection process, eliminating the need for multiple adapters in many cases.
Ease of Connection: To use the microphone, simply plug the 3.5mm TRRS connector into the shared audio input of your recording device. For mobile devices, this means plugging it directly into the headphone/microphone jack. For computers with a shared audio port, the process is identical.
Optional USB Connectivity: For computers that do not have a shared audio port or for users who prefer a USB connection, the SG-110M can be connected using an optional USB adapter (such as USB-MA, USB-SA, or EDU-USB) and a C-300 connector. This provides flexibility for users with different computer configurations, ensuring that the microphone can be integrated into almost any setup. The C-300 connector, when used with a USB adapter, allows the microphone to interface with a computer's USB port, bypassing the analog audio input.
Physical Design: The microphone boasts a solid rotation base, which allows for easy adjustment of the microphone's angle and direction. This feature is crucial for accurately pointing the microphone towards the sound source, optimizing its directional pickup. Its small size contributes to its portability, making it easy to carry and set up in various locations, whether for on-the-go recording with a mobile device or for a more stationary setup with a computer.
Portability: Included with the microphone is a travel pouch, further enhancing its portability and protecting it during transport. This makes it an ideal tool for content creators, journalists, or anyone who needs to record high-quality audio in different environments.
Included Accessories: The package includes the SG-110M Microphone itself, a travel pouch for protection and transport, and a publication (manual) to guide users through its features and usage.

Maintenance Features:

While the manual does not explicitly detail specific maintenance routines, the design and troubleshooting information provide insights into how to ensure the microphone's longevity and optimal performance.

Troubleshooting Guide: The manual includes a troubleshooting section to address common issues, such as the microphone not recording sound. This section guides users through a series of checks:
- Connection Verification: Users are advised to check all connections to ensure the microphone is properly plugged into the recording device. Loose connections can often be the cause of audio issues.
- Input Level Control: It is recommended to check the input control for proper level in the recording software. Incorrect input levels can result in either too quiet or distorted audio. Adjusting the gain or volume settings in the software is a standard practice for optimizing audio quality.
- Mute Status: Users should verify that the microphone is not muted on the digital recording device or in the PC's microphone audio panel. Many operating systems and recording applications have mute functions that can inadvertently be activated, preventing sound capture.
Durability and Care: The "solid rotation base" suggests a robust build quality for the mechanical components. While not explicitly stated, general care practices for electronic devices, such as avoiding extreme temperatures, moisture, and physical impacts, would contribute to the microphone's lifespan. The inclusion of a travel pouch also implies that protecting the microphone from dust and physical damage during storage and transport is encouraged.
Technical Support: Andrea Communications provides comprehensive technical support. Users with additional questions or issues can visit their website for support resources or contact their technical service team via a toll-free number. This readily available support ensures that users can get assistance with any problems they encounter, effectively extending the "maintenance" aspect to include expert help.
Warranty Information: The manual directs users to the Andrea Communications website for warranty information. Understanding the warranty terms is crucial for users, as it outlines the manufacturer's commitment to product quality and provides recourse in case of defects, indirectly contributing to long-term user satisfaction and product reliability.

In summary, the Andrea SG-110M Microphone is a versatile, user-friendly, and portable directional microphone designed for clear audio capture across a range of devices. Its robust connectivity options, thoughtful design features, and accessible support resources make it a practical choice for various recording needs.

Andrea SG-110M Specifications

General

Type	Long gun microphone
Microphone frequency	100 - 10000 Hz
Microphone sensitivity	-36.5 dB
Microphone input impedance	2200 Ω
Microphone Total Harmonic Distortion (THD)	1 %
Power source	-
Operating voltage	1 V
Power consumption	500 mA
Operating temperature (T-T)	-20 - 60 °C
Device interface	3.5 mm (1/8\
Connectivity technology	Wired
Carrying case	Yes
Cable length	0.762 m
Product color	Black

Related product manuals