Andrew James AJ001084 - Cleaning

6
 In the unlikely event of the motor
overheang, a safety cut out will
operate causing the motor to stop. If
this happens, switch o, unplug the
machine and allow the power unit to
cool.
 The ice cream produced should be
so. This can be transferred to a
separate container for storage in
the freezer or if you wish to rm
the ice cream before eang.
 Do not use metal utensils to
remove mix from the bowl.
 Do not remove the inner bowl
from the freezer unl it is ready to
make ice cream.
Tips
 We suggest that you keep your
inner bowl in the freezer so that it
is ready for use. Place it in a plasc
bag before freezing. Freeze the
inner bowl in the upright posion.
 Always make sure the inner bowl is
thoroughly dry before placing it in
the freezer.
 Do not puncture or heat the inner
bowl.
 The inner bowl should be placed in a
freezer that is operang at a
temperature of –18˚c (-0.40˚F) or
below for 8 hours before use.
 For best results always refrigerate the
ingredients before making ice cream.
 The addion of alcohol to recipes
inhibits the freezing process.
Cleaning
 Always switch o, unplug and
dismantle the appliance before
cleaning.
 Never put the power unit in water or
let the cord or plug get wet.
 Do no wash parts in the dishwasher.
 Do not clean the appliance with
scouring powders, steel wool pads or
other abrasive materials.
Power unit
 Wipe with a damp cloth, then dry.
Inner Bowl
 Allow the inner bowl to reach room
temperature before aempng to
clean.
 Take out the inner bowl and wash the
inside of the bowl, then dry
thoroughly. Do not immerse it in
water.
Outer bowl
 Wash and dry thoroughly.
Paddle
 Remove the paddle from the power
unit.
 Wash and dry thoroughly.