Andrew James Bread Maker with scales - Programmes; Start; Stop; Pause; Light

8
Programmes
START/STOP BUTTON
 This secon will give instrucons on how to pause, start and stop the selected
program.
 To start a program, press and hold the Start/Stop buon for approximately three
seconds. A short beep will be heard and two dots will ash, signalling the
program is starng.
 To pause a program, press and hold the start buon for approximately three
seconds. A short beep will be heard and the two dots will stop ashing, signalling
the program is in pause mode. To restart the machine from pause mode press
and hold the start buon for approximately three seconds
 To stop the program press and hold the stop start buon for approximately three
seconds, a long beep will then signal the program has iniated the close down
procedure.
PAUSE
Aer a procedure starts up, you can press the PAUSE buon to pause it at any me. The
operaon will be paused but the seng will be memorized and the outstanding me will
ash on the LCD screen. Press the PAUSE buon again and the program will connue. If
le for 10 minutes without pressing any buon the program will connue.
LIGHT
To view your loaf during the baking process simply press the LIGHT buon once and the
inside of the appliance will become illuminated. The light will stay on for 1 minute and
then go o automacally. If you wish to turn the light o before the minute has elapsed
press the LIGHT buon and it will turn o .