To Next PageTo Next Page
Need help?Do you have a question about the andrews L65/169 and is the answer not in the manual?
Provides an overview of the water heater's design and intended use.
Lists relevant standards for installation and safety compliance.
Details legal requirements for safe operation and installation.
Explains the heater's resistance to Legionella bacteria growth.
Presents specifications for the Standard Range models.
Presents specifications for the Hi-Flo Range models.
Outlines legal and regulatory requirements for installation.
Instructions for attaching the draught diverter assembly.
Guidance on selecting a suitable installation location for the heater.
Details on connecting the propane/butane gas supply.
Specifies how to connect LPG cylinders and manifold.
Instructions for connecting the electrical power to auto ignition models.
Recommendations for installing flue systems.
Requirements for ensuring adequate air supply and ventilation for the heater.
Guidance on water quality, anode maintenance, and scale prevention.
Explains the function of the Hydrojet system for water flow.
Details water connections for standard range vented systems.
Details water connections for standard range unvented systems.
Details water connections for Hi-Flo range vented systems.
Details water connections for Hi-Flo range unvented systems.
Step-by-step guide to commissioning permanent pilot models.
Commissioning steps for Hi-Flo range models.
Commissioning steps for auto ignition standard range models.
Safety precautions for users before lighting the appliance.
Operating sequence for auto-ignition standard range models.
Operating sequence for Hi-Flo range models.
Explanation of the overheat safety device.
Describes and explains the stacking phenomenon.
Recommendations for regular servicing by qualified personnel.
Steps to take before performing servicing.
Instructions for checking and cleaning the standard range burner.
Instructions for checking and cleaning the Hi-Flo range burner.
Guidance on checking and servicing the standard range gas control valve.
Guidance on checking and servicing the Hi-Flo range gas control valve.
Procedures for checking and cleaning flue ways for standard range.
Procedures for checking and cleaning flue ways for Hi-Flo range.
Instructions for cleaning the storage vessel.
Steps for chemically descaling the heater.
Guidance on checking and replacing magnesium anodes.
Instructions for checking the safety valve.
Procedures for restarting the heater after servicing.
Steps for replacing the gas control valve on Hi-Flo models.
Instructions for replacing the thermostat and ECO components.
Steps for replacing thermopile, pilot, and restrictor.
Instructions for replacing the burner assembly.
Troubleshooting guide for auto ignition standard range models.
Troubleshooting for pilot lights and no main burner operation.
Troubleshooting loud whistling noise in Hi-Flo models.
Parts list and diagrams for specific standard models.
Parts list and diagrams for the L84/74 standard model.
Parts list and diagrams for Hi-Flo models.
Parts list and diagrams for the Hi-Flo L32/143 model.
Parts list and diagrams for Hi-Flo L65/169 and L81/251 models.
Lists components for the unvented systems kit (Standard Range).
Lists components for the unvented systems kit (Hi-Flo Range).
Lists components for the 24V auto system kit (Standard Range).
General| Brand | Andrews |
|---|---|
| Model | L65/169 |
| Voltage | 230V |
| Frequency | 50 Hz |
| Type | Water Heater |
| Capacity | 65 Litres |
| Insulation | Polyurethane foam |
| Warranty | 2 years |
